SEACRAFT ENC3 PRO Electronic Navigation Console

SEACRAFT ENC3-PRO navigation console

The Seacraft ENC3-PRO navigation console differs from the ENC3 version by the addition of an external GPS sensor.

The GPS antenna is connected to the ENC3-PRO via a 3m or 10m cable and a float attached to the antenna. When deployed, the antenna rises to the surface and picks up the GPS signal to give the ENC3 its precise position. This allows divers to check their route without surfacing.

Kits are available for SEACRAFT Future and SEACRAFT Ghost scooters, with all the fixings and the GPS antenna and its 10m cable.
Another quality of the ENC3PRO is that on the surface you can prepare your navigation by integrating up to 29 pre-programmed routes, with a description of each point that can be transferred to the ENC3-PRO.

During the dive, the points are retained and several export formats are available, such as Google Earth, GIS or RAW raw data.

ENC3-PRO product content

Ref E1130

• ENC3-PRO console
• Carrying case
• Charging cable
• Spare seals

Ref FE1114 (Future) and GE1115 (Ghost)

• ENC3-PRO console ref E1130
• Horizontal speed sensor E1082
• 2x support handles F1077/G1079
• Type B GPS sensor with 10m cable ref E1140
• 2x cable retaining plates ref E1126
• 1x float clamp ref E1124