Short socket yoke regulator removal tool

Tool
for
unscrewing
of
calipers
of
pressure reducer

This tool for unscrewing/screwing pressure reducer calipers consists of :

• A specially machined socket to fit between the main nut and the yoke.
• An extension allowing the use of a ratchet wrench, for example, with a standard 3/8 female end.
• Ideal for unscrewing/screwing a caliper, at the recommended torque.....without damaging the nut!

Nut dimensions :

• Outside diameter 32mm
• Total height 20mm
• For 25mm wide nut